UNIVERSITY OF MANAGEMENT AND TECHNOLOGY
UMT.EDU.PK

Department of Civil Engineering

Click on any of the below labs to check the details.

Soil Mechanics and Foundation Engineering Lab

Sr. no.Description of TestRate (Pkr)
 1.   Moisture content 600
2.  Unit Weight 600
3.  Sieve analysis (dry) 1500
4.  Sieve analysis (wash) 2500
6.  Particle size distribution of powders by Hydrometer 5000
7.  Liquid limit / Plastic Limit (each) 1500
8.  Specific Gravity (Fine grain) 1500
9.  Specific Gravity (Coarse grain) 1500
10.  Standard Proctor Compaction (4'' mould) 2000
11.  Standard Proctor Compaction (6'' mould) 2500
12.  Modified Compaction (4'' mould) 2500
13.  Modified Compaction (6'' mould) 3000
14.  Direct Shear Test (C & ?) 5000
15.  Coefficient of Uniformity of soils 3000
16.  Density of sand for sand cone apparatus 1500
17.  Triaxial Test 5000
18.  Unconfined Compression Test 2500
19.  Standard Penetration Test 5000

 

Construction Materials

Sr. no.Description of TestRate (Pkr)
1. Water Absorption of Bricks 300
2. Efflorescence Test of Bricks 500
3. NDT using rebound hammer and ultrasonic tester 5000
per Location
4. Water demand of Powders by Hobart Mixer of 5 liters capacity 1500
5. Initial setting time by Vicat’s Apparatus 1000
6. Final setting time by Vicat’s Apparatus 1000
7. Soundness of cement 1000
8. Specific gravity of cement by Hydrometer 1500
9. Fineness of cement by passing 200 sieves. 1000
10. Sieve Analysis of Sand 1500
11. Fineness Modulus of Sand (Gradation Zone) 2000
12. Water Absorption of Sand 2000
13. Specific Gravity of Fine Aggregate 1500
14. Density / Unit weight of Fine Aggregate 2000
15. Unit weight of Concrete 2000
16. Shrinkage Test 15000
per Sample
17. Calorimetry Test 15000
per Sample

 

Transportation Engineering Lab

Sr. no.Description of TestRate (Pkr)
1. Penetration test 2500
2. Softening point 1500
3. Flash and fire point 2000
4. Asphalt mix design 30000
5. Los Angeles abrasion test 2000
6. Flakiness index 2000
7. Elongation index 2000
8. Specific gravity of aggregates 1500
9. Density of aggregates 2000
10. Specific gravity of bitumen 1500
11.

Ductility

 1500

 

Strength of Materials Lab

Sr. no.Description of TestRate (Pkr)
1. Deformed steel tensile test (up to 1 inch) 1500
per piece
2. Deformed steel tensile test (over 1 inch) 1800
per piece
3. Weight and gauge (area, nominal) 400
per piece/test
4. High strength tensile test (Pre-stressing strands) 5000
per piece/test

 

Environmental Engineering Lab

Sr. no.Description of TestRate (Pkr)
1. Biochemical Oxygen Demand (BOD) 2000
per sample
2. Total Suspended Solids (TSS) 1000
per sample
3. Total Desolved Solids (TDS) 1000
per sample
4. Turbidity 500
per sample
5. pH 500
per sample

 

Material Testing Rate List

© Copyright UMT, 2015. All Rights reserved.

Website Credits: OCM-UMT Back to Top